Star InactiveStar InactiveStar InactiveStar InactiveStar Inactive
I've been making some progress on disassembling the hubs for the Land Rover. I even now have one of them completely apart and even the oil and muck cleaned off it.
There are nearly all of the parts. The Free Wheeling Hub is underneath the rag in the foreground and the bearings are sitting on the other side of the parts washer. I want to soak them in petrol or some other fairly strong solvent that will not have much water in it.
To make life easier for myself I decided to get a new toy. On the right is what I have been using and on the right is a new parts washer from Supercheap Auto. I was looking at the prices for a replacement circulation pump when I saw Supercheap have a sale on these parts washers which meant that they were only a few dollars more than the pumps I was looking at. So for the extra few dollars what I got was essentially the bucket (the one I have been using is still serviceable), the spout and the electrics. All of this is stuff I could have gotten, but not for that price and not that quickly. Also the bucket has a shelf in it so I don't have to have all of my parts floating in the degreaser. Also it is made from metal rather than plastic which means it will handle more knocks than the plastic one will.
I discovered a heap of bolts that I'd left in the plastic bucket. I would've found them, but probably not before they got all mixed up.

Now I need to get a clean plastic crate and put all of these parts in it with a splash of kerosene or something to form an oily film so that the parts can't rust. Then I can start pulling down the other one.

In the meantime however, it's getting warmer and I've remembered that I have A/C so I'm going to do some inside projects instead now.


Comments powered by CComment